내부식 캐스팅
주문처리 틴에 모래 주름 бронза 청동기 부품 구리 주름 도면 및 샘플에 따라 부싱
This page covers custom sand-cast bushings in tin bronze or brass, specified from drawings or samples. Define the drawing or sample reference Provide the drawing revision or identify the reference sample. State which sample dimensions and features are critical to the replacement part. Confirm the ...
알루미늄 бронз 부싱 맞춤 모래 주름 청동 공예품 하드웨어 가공 비 표준 구리 주름
This page covers aluminum bronze bushings and custom brass or copper-alloy castings for hardware applications. Prepare a bushing or hardware drawing For bushings, identify the shaft and housing interfaces and the required fits. For hardware castings, identify the finished geometry and attachment ...
청동 주사기 청동 주사기 모래 주사기 청동 부시 공급
This page covers brass bushings and brass or bronze castings. Sand casting and die casting should be treated as separate process requirements, not assumed to apply together to every part. Separate product and process requirements Specify whether a brass bushing or another casting is required. ...
정밀 castings 구리 부시 틴 브론즈 청동 다양한 밸브 기계 부품 및 액세서리
This page covers copper-alloy bushings, valve parts and mechanical accessories in tin bronze or brass. Identify the component being quoted State whether the enquiry concerns a bushing, valve component or another accessory. Identify the alloy for each line item rather than treating brass and tin ...
공예품 하드웨어 가공 주름 모래 주름 알루미늄 청동 부품 주문 비 표준 구리 부싱
This page covers sand-cast aluminum bronze parts and custom non-standard bushings. Define the casting and finished features Provide the casting outline and identify surfaces that require machining. For a bushing, show bore, outside diameter, length and required fits. Identify any decorative or ...
외부 윤활이 필요하지 않은 부싱
This bushing requires no external lubrication. Provide the intended operating conditions so the part specification and suitability can be reviewed for the application. Application information Provide shaft size, housing bore, bushing length and required fits. State load, speed, temperature and ...
일체형 가공 슬리브 부싱 - 드로잉
This product is a one-piece machined sleeve bushing. The enquiry should define the part geometry and its mating components. Provide the drawing revision and required material rather than relying on a generic bushing description. Assembly details Identify the shaft diameter, housing bore and required ...
고객 도면에 대한 맞춤형 부싱
This page covers a single bushing product. Define the finished bushing on a controlled drawing before requesting a quotation. Identify the required material and the dimensions that form the shaft and housing interfaces. Part requirements Mark the datum references and critical tolerances. Specify ...
C93200 부싱을 도면으로
This product is a C93200 bushing. Provide the component drawing, applicable material specification and required dimensions for a part-specific quotation. Drawing information Identify the bore, outside diameter, overall length and required fits. Show grooves, holes and shoulders where required by the ...
맞춤형 황동 및 청동 밸브 몸체 주물
A valve body casting enquiry needs a defined drawing, material and acceptance basis. State whether the requested supply is a casting blank or a machined body; neither description establishes a complete valve assembly. Define the pressure boundary and interfaces Attach the controlled body drawing and ...
도면에 알루미늄 청동 주조 부싱
For an aluminum bronze cast bushing enquiry, separate casting requirements from finished machined dimensions. Attach the relevant drawings so the proposed supply scope is clear. Specify the casting and machining scope Name the aluminum bronze grade and material specification. Identify whether the ...
소형 모터 어셈블리용 구리 합금 부싱
For a copper-alloy bushing used in a small motor assembly, define the finished part and lubrication requirements before comparing quotations for a replacement or new assembly. Provide the motor assembly requirements Attach the drawing with bore, outside diameter, length and relevant geometric ...
도면에 플랜지가 붙은 청동 부싱
A flanged bronze bushing needs more definition than its bore and length. Include the flange and sleeve geometry so the proposed part can be checked against its mating assembly. Dimension the flange and sleeve together Provide bore diameter, sleeve outside diameter and overall length. Show flange ...
섬유 마감 기계용 청동 부싱
For a textile finishing machinery replacement, identify the bushing by its drawing and location in the machine. A machine model helps describe the enquiry, but does not replace component dimensions. Identify the replacement part Provide the machine reference and the location or function of the ...
고객 도면에 대한 굴삭기 부싱
An excavator bushing should be matched to its part drawing and installation position. Use the machine and part references to identify the enquiry, then confirm dimensions and material before accepting a replacement. Supply an unambiguous dimensional specification Identify the excavator model, ...
